When you need a material that survives the absolute worst heat in your kiln, silicon carbide fire bricks are the first thing we recommend. Many customers ask us about the silicon carbide brick working temperature. In real workshop conditions, these bricks handle steady heat up to 1650°C safely, depending on the bonding type like clay-bonded or nitride-bonded.
-
Core silicon carbide brick properties
Let’s look at the basic properties of silicon carbide bricks. The most critical factor is the silicon carbide brick high temperature strength. Even when your furnace is running at maximum load, these bricks do not soften, bend, or warp.
We know that silicon carbide fire brick properties must be stable, because if a brick fails early, you have to stop the whole line, and that costs you heavy money.
-
Thermal shock and heat transfer
A big problem in industrial kilns is sudden temperature change. This is where silicon carbide brick thermal shock resistance does a great job.
The silicon carbide brick thermal expansion is very low. So, when your furnace heats up fast and cools down fast, the internal structure stays tight and the brick doesn’t crack.
Another big point is heat transfer. The silicon carbide brick thermal conductivity is much higher than standard fireclay.
The silicon carbide refractory brick thermal conductivity allows heat to move fast through the wall, which is perfect for muffle furnaces or cooling zones.
If your specific kiln zones don’t need this extreme heat transfer but still need good strength and cost savings, you can check our high alumina furnace bricks for heavy load kilns or anti-spalling high alumina refractory bricks instead.
-
Wear and chemical attack resistance
Heat is not the only enemy in the kiln. The silicon carbide brick wear resistance is extremely high. If your heavy materials slide, drop, or scrape against the furnace wall, SiC bricks resist the physical abrasion. At the same time, the silicon carbide brick corrosion resistance is solid against acid slags and aggressive gases that normally eat away standard linings.
The real silicon carbide brick temperature resistance depends on getting the formula right for your specific kiln. If you are not sure what specs you need, just send your furnace drawing to our workshop. We will check the details and tell you straight what works.